Dongguan swipe card automatic door customized installation / Dongguan office building fingerprint responsive door debugging quotation
Time: 2020-05-05 View: 1651
Dongguan swipe card automatic door customized installation / Dongguan office building fingerprint responsive door debugging quotation
Dongguan swipe card automatic door customized installationAuto sensing door company, auto sensing door related knowledge and details: to protect clamped objects and door body safety. 4. automatic reset: after the safety confirmation on site, there is no need to switch the power supply, as long as the door is pushed to the open position, the door will automatically resume work. 5. The power of automatic door lock is generally 350n (equivalent to powerful electromagnetic lock) 6. No pressure, standby, high efficiency and energy saving.Standby power consumption: usually when the automatic door is in standby state, the motor is charged. The motor not only has noise and heat, which affects the service life of the motor, but also consumes a lot of electric energy. Cn new technology adopts excitation current and instantaneous boosting technology. When the door does not move, the motor does not charge. When the door is pulled, the motor will generate an exciting current, which will be transmitted to the controller. The controller will reverse the current of the motor in a few seconds. Electric doors are all kinds of doors driven by electric motors. Electric door plays a decisive role in our daily life. Safety, beauty, convenience and convenience greatly improve our quality of life.Common troubleshooting of automatic revolving door to solve dust, rain and other problems: try to do a good job in waterproof and regular maintenance (the dust-proof and waterproof level of automatic door is not reflected in the standard of automatic door). 2. There are many solutions for the intermediate node from the control end to the controlled end: minimize the intermediate node in the electrical design. Generally, the double wing automatic revolving door is equipped with four revolving door radars, two on the outside and two on the inside of the door. a. The common fault of the radar outside the door is that it is wet by rain and causes fire. Solution: waterproof. b. In cabin radar failure. Usually, users of automatic doors will install hot air curtain inside the automatic doors. If the hot air curtain is too close to the revolving door radar, it will cause interference to the radar.The automatic revolving door is far inferior to other automatic doors, because the movement mode of the door body determines that only the wool seal can be used. 2. For the structure of the automatic revolving door and the maintenance door of the automatic revolving door, it is also necessary to consider the rapid evacuation of people in an emergency. The wing revolving door of the structure should be able to push open manually in the case of power failure. The function of the automatic revolving door to open the door in such an emergency uses a special body similar to the hinge link hardware. But when the wind pressure is large, the door leaf structure is easy to be blown open by the wind. The strength of hardware also becomes one of the main quality problems of automatic revolving door. The international automatic revolving door factory also designed a special electromagnetic lock.2. Automatic induction door, push the door plate when the power is off. 3. Automatic induction door, push the door plate when the power is off. The double wing revolving door of the suspended automatic revolving door (double wing revolving door) adopts the design of hanging the whole door body with the upper circular guide rail, which is driven by one or two motors. The control part is the same as the stable automatic revolving door. It is worth mentioning that from the structural point of view, the emergency opening function of the two wing revolving door is very simple, that is, an automatic sliding door or a manual sliding door is set in the middle. The two wing revolving door has two stop positions, one is that the door body is parallel to the entrance plane, and the automatic translation door or manual side door in the middle can be used directly; the other is that the door body is perpendicular to the entrance plane, and the arc at both ends of the door body seals the two openings of the revolving door at the same time, which can obtain good sealing and heat insulation effect in winter.
