Price of Nanshan automatic induction door machine / customized automatic induction door with aluminum alloy frame
Time: 2020-05-14 View: 1433
Price of Nanshan automatic induction door machine / customized automatic induction door with aluminum alloy frame
customized automatic induction door with aluminum alloy frameAutomatic induction door is equipped with induction door machine, which is composed of a series of components that control the opening and closing of automatic door, also known as automatic door unit or induction door unit. The components of induction gantry crane generally include: motor, controller, pulley, belt, etc. Tips on the life of automatic doors automatic doors should pay attention to some daily maintenance, of course, also pay attention to a lot of skills, such as: clean the commercial smooth automatic door pulley, just use a broom to clean the dust, do not refuel. Check the belt tensionIf there is any looseness, check for looseness and poor contact. Check whether the electric plug of the electric contact is loose or in poor contact. Check the infrared sensor bracket and fixed position. Check the height of blades and aquatic products of commercial light automatic door, and connect and fix them after they are correct. Although compared with similar foreign products, domestic smart lock manufacturers are also catching up with each other and have a bright future.Clean the limiter and check whether it works normally. Clean the shell of infrared sensor and safety sensor to make it sensitive to normal operation. Turn off the main power supply, test whether the standby power supply can work normally, and check the battery power repeatedly. Check the electronic lock for proper operation. Find and correct problems in time. If necessary, the thrust and stop action of the door speed motor can also be adjusted. Check all safety systems for proper operation. Automatic door maintenance tips: when using the automatic door, you should correctly follow the training operation of the automatic door, and pay special attention to the system operation of the electronic lock. Therefore, a good installation door can have a train or promote the normal and constant speed operation of the automatic door train, to avoid emergency braking or forced push and pull, which will cause the control system program is not in place, affect motor overload, damage or reduce the service life. What quality problems should be paid attention to for automatic door and its auxiliary configuration? The theoretical understanding of automatic door should be the extension of the concept of door, and the function of door should be developed and improved according to people´s needs. Automatic door refers to the action that people can access the door (or recognize an access authorization as a control unit of opening signal, open the door through the drive system, and automatically close the door after people leave, and control the process of opening and closing the system). Next, Shenzhen automatic door will tell you the quality problems and auxiliary configuration of the automatic door: pay attention to the parallelism between the ground rail and the steel beam during installation. The technology content of electronic induction automatic door is relatively high. Marking equipment is used to determine the revolving door of mingchuang line. After reading the valid card, you can walk normally after entering. The revolving door turns every time.In order to make the product normal use, less failure, durable, safe and reliable, we should try to choose the enterprise´s products. The automatic door is equipped with a guide low track. It is better to make a horizontal line in the floor construction, accurately embed the automatic door with wood support tracking at a lower position, and note that the length of the wood support exceeds * the width of the open door, which is not suitable for the use of the cut, so when you see the quality of the cut and the beautiful connection between the low track and the floor. The installation of steel beam on the upper part of automatic door is an important link in the installation process of automatic door. The box body equipped with mechanical device and electrical control device is fixed on the box body. Therefore, the strength, rigidity and stability of the steel beam and the connection between the steel beam and the tunnel side are required. If the design depth of the preliminary construction drawing is not enough, the main structure construction must contact the designer for implementation. The embedded parts connecting the two ends of the steel beam shall be anchored on the reinforcement of the concrete member. The problems faced by the company and small and medium-sized anti-theft door companies also have different characteristics: auxiliary configuration of automatic door: equipped with standby power supply: automatic door can work normally in case of power failure, can be equipped with standby power supply.
