Gongming contactless door installation manufacturer / fingerprint password automatic door system commissioning and replacement
Time: 2020-05-14 View: 2526
Gongming contactless door installation manufacturer / fingerprint password automatic door system commissioning and replacement
fingerprint password automatic door system commissioning and replacementIf the time of automatic door receiving signal is longer and longer, the controller will have the problem of signal input system, and the process of time will also damage the electrical components. Large torque: the transmission adopts large torque, small volume DC brush less motor, and the gearbox adopts spiral gear, which makes the operation faster, quieter and braking more stable. In our life, many people don´t know automatic door. In many cases, they press the key at will, resulting in the loss of the original power of the automatic door, which will also cause a considerable loss of the automatic door.The function and waterproof requirements of the automatic induction door are also quite high, and the greater the power of the foot pedal, it is easy to cause the failure of the foot switch. Therefore, many automatic sensing doors will stop rotating when they reach a certain position inside, which facilitates the protection of automatic sensing doors.With the development of modern automatic induction gate technology, more and more people are integrated into the automatic induction gate control system. However, in recent years, the performance of dynamic door has been greatly improved.When the door leaf is opened and closed once, its working process is as follows: when the induction detector detects someone entering, the fluorocarbon sensing door transmits the pulse signal to the main controller, the main controller will inform the motor to judge after operation, and at the same time monitor the fluorocarbon sensing door revolution of the motor, so as to know the engine afterburner and slow operation at a specific time. When the motor gets a certain running current, the motor moves forward to transmit the electric energy to the synchronous belt, which then transmits the electric energy to the spreader system to open the door leaf; after the door piece is opened, the controller makes a judgment on the response expert of the fluorocarbon sensing door, if it is necessary to close the quality of the fluorocarbon sensing door, inform the motor to move in the opposite direction, and close the door piece. adoptSensing area: sensing the approaching person or object and sending signals to the controller area of the controller area: This is the core component of the automatic door. The door body of Ka automatic door is usually made of 12mm toughened glass, with strong air permeability. The special color steel plate or stainless steel plate control system of our factory adopts the automatic door control system and the card swiping access control system to realize the card swiping automatic door opening mode. Receive signals from the sensing area. This area controls the opening / closing and position of the door. Power / transmission area: gear group: composed of motor, gear group and toothed belt, indicated according to the signal of control area. Open and close operation. Each switch is flexible 1. Microwave sensor 2. Infrared sensor 3. Contactless sensor switch.
