Main performance of Bao'an translational responsive door / installation cost consultation of Bluetooth controlled automatic door
Time: 2020-05-14 View: 2793
Main performance of Bao´an translational responsive door / installation cost consultation of Bluetooth controlled automatic door
installation cost consultation of Bluetooth controlled automatic doorThere are many kinds of Haifeng automatic induction gate. First of all, the translation induction door group consists of the following components:1. Main controller: it is the control center of automatic door. Through the large-scale integrated block with instruction program, corresponding instructions are issued to instruct the operation of motor or electric lock system. At the same time, the opening speed, opening amplitude and other parameters of the door leaf are adjusted by the main controller.2. Inductive detector: it is responsible for collecting external signals, such as human eyes. When the moving object enters the working range, a pulse signal is sent to the main controller;3. Power motor: provide the power to open and close the door, and control the acceleration and deceleration of the door leaf.4. Movement track of door leaf: like the rail of train, the hoisting wheel system that restricts the movement of door leaf will move in a specific direction.5. Door leaf lifting wheel system: it is used to suspend the movable door leaf and drive the door leaf to operate under the power traction.6. Synchronous belt (triangle belt is adopted by some manufacturers): it is a wheel system that transmits the power generated by the motor and pulls the door leaf lifting device.7. Lower guiding system: it is a guiding and positioning device at the lower part of the door leaf to prevent the front and rear door body from swinging when the door leaf is running.How much is the glass sensing door per meter? When the door leaf is opened and closed, the workflow is as follows:When the induction detector detects someone coming in, it will send the pulse signal to the main controller. The main controller will inform the motor to judge after running, and monitor the car revolution at the same time, so as to inform the motor application force to run slowly at a certain time. After the motor gets a certain running current, it moves forward to transmit the power to the synchronous belt, which then transmits the power to the spreader system to open the door leaf; when the door leaf is opened, the controller will make a judgment, if the door needs to be closed, it will inform the motor to move in the opposite direction and close the door leaf.The control system of automatic induction door is basically the same. It can be connected according to the control system of automatic door, such as door opening signal, access control system, safety device, centralized control, etc. However, according to the use characteristics of the building, different personnel can effectively combine and reasonably configure the control system of auxiliary equipment.
