Hi, Welcome to our website.
24h*7 Hotline
0755-29941300 13823711712

Contact us

Address: Third Industrial Zone, New Komeito Village Shenzhen Guangming 26
Postal Code: 518000
Tel: 0755-29941300
Fax: 0755-27123802
E-mail: 653088031@qq.com
Mobile: 13600187830

Details

Site: Home > News > Industry News > Details

Futian microwave radar sensitive door wholesale / Longgang infrared sensitive door customized manufacturer

Time: 2020-05-21 View: 1410
Futian microwave radar sensitive door wholesale / Longgang infrared sensitive door customized manufacturer
Futian microwave radar sensitive door wholesale

In our daily life, we have all been exposed to responsive door, but do we know the working principle of responsive door? Let´s take a look at the introduction of responsive door principle.


Induction door mainly refers to a kind of control system to open and close another kind of door through induction. According to different sensing modes, it can also be divided into microwave sensing door, touch sensing door, infrared sensing door, brush Ka sensing door, etc.


The control system of automatic induction door is basically the same. It can be connected according to the control system of automatic door, such as door opening signal, access control system, safety device, centralized control, etc. However, according to the use characteristics of the building, different personnel can effectively combine and reasonably configure the control system of auxiliary equipment.

Automatic door opening system is the source of trigger signal. Common are microwave radar and infrared induction system. Microwave radar can reflect the displacement of the object and make the corresponding reflection. The reflection speed is also very fast, which is suitable for normal people to walk. Its main feature is that if someone is in the accessory but not moving, the radar or infrared device will not reflect, so as to achieve the effect of energy saving. It can also protect the gantry crane. The requirements can be met by using a wireless receiver to connect to an automatic door in a contact manner, and by using a wireless receiver.


The function and waterproof requirements of the automatic induction door are also quite high, and the greater the power of the foot pedal, it is easy to cause the failure of the foot switch. Therefore, many automatic sensing doors will stop rotating when they reach a certain position inside, which facilitates the protection of automatic sensing doors.

If the time of automatic door receiving signal is longer and longer, the controller will have the problem of signal input system, and the process of time will also damage the electrical components. In our life, many people don´t know automatic door. In many cases, they press the key at will, causing the automatic door to lose its original power, causing considerable losses to the automatic door. The inductive CE detector on the inductive door has a detector. When someone enters the detection range, a pulse signal will be sent out, and the pulse signal will be sent to the main controller.
Service Online Miss shiManager Li
Hotline
  • 0755-29941300
  • 13823711712