How to adjust the speed of Dongguan glass sensing door * how to install Shenzhen sensing door
. Glass sensing door generally needs to be used together with automatic sensing system and power supply system. Set the speed of opening and closing the door. Open and close the door according to the set procedure through the induction of human body.
Installation and adjustment speed of glass sensing door
1. Installation of glass sensing door:
(1) The wooden brace should be embedded in the track part of the automatic door. At the same time, pay attention to the length of the wooden brace, which is twice the width of the open door.
(2) If one-to-one mechanical device is adopted for the chassis of important components, fixed electric control can be installed on the upper steel beam, steel beam and hole edge, which requires certain rigidity, strength and stability.
(3) Finally, when installing the track and steel beam, pay attention to the parallelism of the two directions, place the glass on the track, conduct debugging, and check whether it can be used normally.
Response speed adjustment of glass door
Open the sensor of the sensing glass door and you can see the speed adjustment on the panel. Press + to speed up the closing speed, press - to slow down the opening and closing speed.
