How to install the sensor of industrial gate / industrial liftgate in Dongguan steel structure workshop
Time: 2020-06-18 View: 1355
How to install the sensor of industrial gate / industrial liftgate in Dongguan steel structure workshop
How to install the sensor of indu
strial gate
Haifeng industrial liftgate is mainly used for the exterior doors of medium and high-grade factories. Because of its small floor area, stable operation, good sealing and heat insulation performance, it has replaced the traditional electric sliding doors and rolling shutters,Emergency door opening device for industrial liftgate of steel structure workshop:The hoisting door of steel structure workshop has high hardness and heavy weight. Normal power on can be automatically turned on. Easy to operate. However, blackouts or blackouts can also occur. Here, Dongguan industrial elevator door has several configuration schemes:1. Standard chain: when the power is cut off, the lifting door can be opened through the chain on one side of the motor, and the automatic control is changed to manual control.2. Configuration of standby power supply: this configuration is more simple, which can be opened automatically with little or no power, saving labor and labor; for the liftgate with explosion-proof requirements, this method can be selected.3. Manual wrench: when the above two devices are not available, open the motor cover, rotate the bearing, and drive the liftgate to operate.Technical parameters of industrial liftgate of steel structure workshop:1. Door plate material: double-layer mm steel plate is used for Nanjing Industrial liftgate. The surface is sprayed and embossed with white roller to increase the beauty, antifouling and firmness. The whole door is connected by the door plate, and the connection of the door plate is treated with anti pinch handle to protect the operator´s safety.2. Torsion spring steel wire: according to the weight and size of the door body, the configuration of torsion spring and steel wire has different types and models, and its stress path and balance force need to be fully matched.3. Sealing material: the lifting door of steel structure workshop is sealed with EPDM double-sided. The bottom edge is sealed with standard wireless air bag soft bottom edge, which has double functions of waterproof, dustproof, sunscreen and compression resistance.4. Small door configuration: compared with the traditional rolling shutter door, Nanjing industrial elevator door has the advantages of being able to open the small door, and the small door does not affect and occupy the installation space; the installation of the small door is more simple and convenient. Pay attention to the sensors that need to pass during installation. When the small door is opened, the power of the door is automatically disconnected and the safety factor is high.5. Guide rail on both sides: the guide rail is designed as C-type, which can cover pulley and bracket well. Another advantage is to prevent fingers from getting caught in the guide rail by mistake.
