Nanshan straight pole gate repair replacement factory which good reputation
Time: 2020-08-21 View: 1581
Nanshan straight pole gate repair replacement factory which good reputation
Nanshan straight pole gate repair replacement factory which good reputationShenzhen Haifeng Automatic Door Co., Ltd. is specialized in making straight bar gate, fence gate and various community gates.
People can´t be more familiar with telescopic doors, and the same principle applies to gate gates.Characteristics of PSD1. Appearance design, precision CNC machining, anti ultraviolet electrostatic spraying, outdoor protection grade IP54,2. Precision casting sine lever transmission mechanism can reduce brake rod vibration, reduce motor load and prolong service life,370W AC torque motor, no current impact, protect the controller, prolong the service life of the controller,4. No contact limit, long service life, no bad contact, positioning deviation of door pole, misoperation, etc,5. safety, built in Gao Min lift priority, pressure resilience function, foam rubber bar anti smash stick.6. Unobstructed mode. When the unblocked mode is set, the gate does not pay attention to the action of lowering the bar, and keeps the vertical state to control the traffic lights,7. Serial command control,8. Circuit self-test, automatically detect the abnormal circuit during operation, and report according to the level;9. Anti condensation, motor always on, low power consumption, keep normal temperature, low temperature, no icing,10. Manual locking mechanism, power-off manual landing bar mechanism,11. Optional functions: wireless remote control, anti fall bar, anti-collision brake lever, bent arm, fence bar, herringbone pole, etcAccording to the shape and function, the industry has launched new products such as straight bar door, curved arm door, fence door, herringbone door, road gate, ordinary gate, slot door (revolving door, swing door, three roll door, wing door), etc. And application fieldsIt can meet the different needs of industry units.3. The control box must be installed in a dry and ventilated place. It is strictly forbidden to approach high-power radio equipment to avoid affecting the normal operation of the equipment. Do not use excessive force or damage when using the control buttons.4. Personnel are not allowed to stay on the guide rail and the vehicle during operation. Operators should pay attention to the operation of the door at any time to avoid accidents.5. The track should be cleaned regularly to avoid the accumulation of debris affecting the operation.6. The transmission device shall be filled with oil at least once a year, the chain shall be filled with lubricating oil frequently, and the wear condition of each component shall be checked. Seriously worn parts should be repaired or replaced in time. This also indirectly led to the delay of electric door technical standards, but the standard voice of electric door industry engineering construction association is getting higher and higher7. When pushing and pulling the electric telescopic door, open and close it gently and slowly. Do not push or pull hard to cause damage.8. In case of product failure, please inform the maintenance personnel for maintenance. Non personnel are not allowed to open this product. Otherwise, it will be regarded as giving up the warranty voluntarily.9. The faulty products can be guaranteed with the product warranty card (except for human or natural disasters).
