Maintenance method of automatic glass induction door installed in Luohu
After the installation of automatic glass sensing door (referred to as automatic door), although it can not meet the daily use, it must be in the charge of a special person. The person in charge needs to know how to use the automatic door in daily life, including daily operation, safety assurance and cleaning and maintenance. The door provides a comprehensive training solution for each project. Next, I will introduce the daily maintenance solution of automatic door.
Maintenance method of automatic induction door
First: the mechanical transmission part shall be coated with gear oil, and the dusty part shall be cleaned and re coated with lubricating oil.
Second: stainless steel shell should not be cleaned with corrosive detergent, otherwise it is easy to appear rust spots, affecting the appearance.
Third: if the door operator does not move and there is a buzz during use, please close the switch immediately
Check whether the automatic door is jammed with foreign matters, and recover the power supply after troubleshooting!
Fourth: if the door is always open or closed, turn off the power immediately and check the sensor and phase in time
Close the circuit and replace the damaged parts in time to avoid damaging the motor and causing greater loss!
Fifth: if the glass is broken, please turn off the motor to avoid uneven weight
Damage to motor!
Sixth: when not in use for a long time, please cut off the power supply to avoid the motor being damaged by lightning!
Seventh: if the glass and accessories are found to be loose, they shall be repaired immediately.
