How to efficiently install the widely used fast rolling shutter door
How to efficiently install the widely used fast rolling shutter door
The wide application of fast rolling shutter door comes from the unique characteristics of high-speed rolling shutter door, not only in energy saving, but also in high-tech intelligence and automation. Accordingly, according to different market demands, the fast rolling door can greatly improve the work efficiency, provide a safe environment for all aspects, and provide security for the property of consumers.
At the same time, fast rolling door can provide a better working environment for all manufacturers. Fast shutter door also has different specifications, consumers and businesses can customize according to different specifications. More importantly, high-speed doors are characterized by their color.
For example, the high-speed gate has many colors to choose from, and also creates more preferences for different customers, which is a visual combination.How to install fast rolling door efficiently?1. Before installation, the installation personnel must be familiar with the installation drawings of the fast rolling shutter door, check whether the circuit is in place, and make other installation preparations, including the required parts, tools, etc.2. Check whether the size of the door is consistent with the size of the opening before installation;Whether the number of rail supports is correct;Whether the position of the embedded parts in the hole and the bracket is correct.3. The process flow is roughly divided into: hole treatment, thread biting, fixed roller drive device, no-load test run, curtain plate installation, guide rail installation, test run and cleaning.4. Hole treatment: check whether the hole size is consistent with the product size, generally the width and height of the hole shall not be greater than 5m, and check the position and quantity of the embedded parts.5. Line breaking: measure the elevation of the hole, spring up the vertical line of the two guide rails and the center line of the roller.6. Fix the rolling shutter door and transmission device: the bottom plate is welded on the embedded iron plate, the left and right brackets of the rolling shutter door are fixed with screws, and the quick rolling shutter door reel is installed. After the installation of the fast rolling shutter door, it should be able to operate flexibly, then install the reducer and transmission system, and install the electrical control system.
