Hi, Welcome to our website.
24h*7 Hotline
0755-29941300 13823711712

Contact us

Address: Third Industrial Zone, New Komeito Village Shenzhen Guangming 26
Postal Code: 518000
Tel: 0755-29941300
Fax: 0755-27123802
E-mail: 653088031@qq.com
Mobile: 13600187830

Details

Site: Home > News > Industry News > Details

Should the automatic door be maintained and inspected regularly after installation

Time: 2021-08-26 View: 1105

Should the automatic door be maintained and inspected regularly after installation

Should the automatic door be maintained and inspected regularly after installation

After the automatic door is installed, it shall be maintained and inspected regularly to ensure normal operation. Even if high-performance automatic door is used, if there is no


The method gives play to the function and performance of planning, and there are many faults in daily use. An opening fault will affect the efficiency of the whole building

Fruit. Therefore, the equipment of automatic door must be checked regularly to ensure its smooth operation, so as to maintain its service life.
For example, there may be foreign matters in the guide rail, which will make the sliding produce noise during operation and accelerate the sliding wear. This can check and eliminate foreign matters,
Cut off fault, etc. These problems can be solved through regular inspection. For example, there may be a gap between the belt and the drive and driven
Dry and produce friction and noise, and the belt is easy to break. At this time, the butter on the belt can be solved. The revolving door is faulty
Control in a small range.
According to different places, some automatic doors run thousands of times a day, which makes all equipment must always run at high speed. by
In order to provide corresponding personalized products and solutions for different customer groups, Haifeng has become a prominent advantage. In door body design
, we should make full use of the above ideas and provide door body modeling, door post modeling and flower shape. It avoids the imbalance of the overall aesthetic effect of the door body.
The driving device of automatic door is composed of motor and reducer or motor and hydraulic system. It is set according to the command of the control device and the driving device
A predetermined program to drive the door body to open and close. There shall be a transmission mechanism in the middle of the movement from the driving device to the door body, and the reducer is the transmission mechanism
Part of the actuator.
Now most of the reducers and motors are connected as reducer motors, which will simplify the equipment and facilitate standardization and miniaturization. Subtraction
In addition to the high-speed machine, the transmission mechanism shall be designed according to specific needs. The transmission mechanism can adopt tooth transmission, chain transmission or high-efficiency synchronous belt transmission
。 The controller is a control device with microcomputer as the main body.
Shenzhen Haifeng automatic door professional construction product data. For automatic doors without safety lights, personnel must be prevented from staying in the non inductive range
Inside to avoid clamping. The service life of automatic door electrical components is mainly related to improper use and accidents; Under normal service conditions of automatic door
The wearing parts include guide rail, transmission belt and dynamic wear, which not only refers to the wear under the condition of sliding on the guide rail and moving at a uniform speed, but also refers to
Wear of automatic translation door during short-distance round-trip acceleration.
Generally, the automatic door shall be fully cleaned and adjusted within three months or more than one year.
Firstly, the false fault of induction automatic door (taking translational door as an example) refers to the fault phenomenon caused by external factors, not the fault of unit components
Malfunction. If it is a false fault, you can easily repair it yourself; Of course, if it is really judged that there is an electrical or mechanical problem inside the host
, it is recommended that you contact the technicians of Shenzhen Haifeng automatic door, and we will troubleshoot and replace the accessories for you. Each manufacturer has its own
Special accessories. Each product is mostly incompatible.
For more automatic door installation methods and skills, please consult Shenzhen Haifeng automatic door technical engineer.
Service Online Miss shiManager Li
Hotline
  • 0755-29941300
  • 13823711712