Three precautions for installing electric telescopic door

As we all know, electric telescopic doors are widely used now, but do you know what should be paid attention to when installing electric telescopic doors? Next, the small editor of the electric telescopic door manufacturer will tell you three precautions for installing the electric telescopic door.

1. Wiring installation

When installing the wiring, the cost-effective electric telescopic door will give a correct connection instruction. Be careful not to connect the low-voltage control line with the high-voltage control line in the reverse direction, otherwise it will easily lead to the internal short circuit of the machine, so that the electric telescopic door should be installed correctly. When the door cannot be applied. This step of wiring must strictly comply with electrical safety operation. Electric telescopic door

2. Installation of power line and motor power line

When installing the power line of the electric telescopic door and the power line of the motor, the appropriate copper core sheathed wire should be selected, and the installation should be carried out in strict accordance with the specifications of the manual. The live wire of the power supply and the neutral conductor of the power supply cannot be connected in reverse at the position where the controller is installed. The electric door motor and alarm shall be connected to the designated terminal block in the machine. Because there are many internal terminals, remember not to connect to the reverse position. Electric telescopic door

3. Inspection

The height of the electric telescopic door should be well controlled, and the distance from the ground should not be higher than the specified parameters. At the same time, the lead cables should be carefully fixed along the wall, and they should not be placed randomly, which may cause damage to the cable circuit and cause problems in other circuits. Before connecting the power supply, the installation results can be turned on and the overall inspection must be carried out before use. Electric telescopic door

That´s all for the introduction of the small editor of the electric telescopic door manufacturer in this issue. I hope it can help you. If you have any questions, you can contact our manufacturer.