Shenzhen automatic door: key points for daily maintenance of automatic door

1. The power supply of the automatic door must be set up with a dedicated line. It is strictly prohibited to use it with other electrical appliances.

2. The product can only be used after it is firmly installed and passed the commissioning.

3. The control box must be installed in a dry and ventilated location. It is strictly prohibited to be close to high-power radio equipment to avoid affecting normal work. When using the control buttons, do not use excessive force to avoid damage.

4. When the door body is running, it is strictly forbidden for people and vehicles to stay on the guide rail. The operator should keep an eye on the operation of the door body at any time to avoid accidents.

5. The track shall be cleaned frequently to avoid the accumulation of debris affecting the operation.

6. The drive shall be filled with lubricating grease at least once a year, the chain shall be filled with lubricating oil frequently, and the wear of each component shall be checked. The severely worn parts shall be repaired or replaced in time.

7. When pushing and pulling the electric retractable door, it shall be opened and closed gently and slowly. It is prohibited to push and pull it violently to cause damage.

8. In case of product failure, please timely notify professional maintenance personnel for maintenance; Non professionals are not allowed to open it without authorization, otherwise, it will be deemed as a waiver of warranty rights.

9. Faulty products can enjoy free warranty with the product warranty card (excluding man-made or natural disasters)