How many aspects should be paid attention to for medical automatic door?

Due to the particularity of the place of use, the functionality of the medical door is particularly important compared with the ordinary home decoration door. The clean door shall have good overall performance, beautiful and flat appearance, high strength, corrosion resistance, no dust accumulation, no dust generation, easy cleaning and other advantages, and shall be installed easily, quickly and with good sealing. This requires the manufacturers of medical automatic doors to meet certain requirements in the production process.

1. The door leaf plate of the automatic door is made of high-quality oil-free cold-rolled plate produced by famous domestic steel plants. The surface is processed by grinding, shearing, bending, polishing, and then high-temperature plastic spraying.


2. The internal filling of medical door leaf is usually filled with high-quality flame-retardant paper honeycomb or aluminum honeycomb.

3. The door is equipped with high-strength stainless steel hinges; One side of the door frame can also be equipped with sealing strips to better meet the requirements of air tightness and high cleanliness. The observation window is made of toughened glass (the conventional size is 190 * 830mm), the four sides of the gap are treated with silica gel, and the inner four corners are treated with arc, which is beautiful and generous in appearance. The two sides of the ward door are equipped with nylon "U" type folding door locks, which are high strength, beautiful and durable.

4. Sealing requirements of the door. The voltage range applicable to the electric control part shall be wide. The external surface of the medical door adopts stainless steel plate, electrolytic steel plate, color steel plate, etc., of which stainless steel plate is better, but the cost is higher. The middle sandwich adopts foaming process or honeycomb structure to make the door body with radiation protection requirements. The middle sandwich should have a certain thickness of lead plate clamped in the middle. In addition, the wall joints shall be inlaid with sealing strips.

5. The electric control part shall comply with the provisions of relevant national electromagnetic compatibility standards to prevent interference with the equipment. The motor reducer shall be specially designed to reduce noise to meet the noise requirements of the cleaning room.

6. Special requirements for functions. Be sure to set non-contact proximity sensors, such as non-touch manual sensors or foot sensors, as well as the door closing function of delayed closing and twice sensing function.


7. There should be a standby power connection interface, a functional interface for starting the wind drenching equipment, and the anti-pinch function should be enhanced to improve the protection. The door body must be equipped with the function of preventing the rebound in case of damage.