Common faults and solutions of the electric response door in office buildings

In our daily life, the common sense door refers to the translational sense door and the opening sense door. The translational sense door and the opening sense door have been introduced in the previous article "What is the difference between the translational sense door and the opening automatic sense door". If you are interested, you can check it. The sensing door is one of the automatic doors and also a way of opening. The sensing door is widely used in shops, hotels, enterprises and families. What are the common misoperations in the operation of the induction door?

Common fault 1 of electric induction door: door leaf operation fault

1. Check whether there is door dragging. If there is door dragging, it is difficult for the door to start. The intelligent unit mistook it for fault and operation protection, so that the door stops running.

2. Check whether the maglev automatic door mistakenly triggers the normally open button, which causes the door to be in the normally open state and the door motor to stop running. Electric response door of office building

3. Pay attention to whether the automatic sensing door is equipped with a "safety light". The dust on the safety light or the obstruction on the light device will cause misoperation. Use the automatic door to control the door that is mistaken for an object in the middle and stop the door.

Common fault 2 of electric induction door: automatic switch of door leaf

1. Check whether there are living objects entering the sensor range, such as the shaking of pedestrians, vehicles and other objects, and even the refraction of strong light may cause the sensor to misoperate.

2. Check the sensing range of the sensor. If the sensor is set too far, the sensing distance is relatively far, and it is easy to sense the movement of the object, making the door switch automatically.

3. Check whether the stainless steel cover plate shakes. The cover plate will also shake the sensor, resulting in sensor misoperation

Common false alarm 3 of electric induction door: loud noise when the door leaf is running

1. Check whether there are waste or small sundries in the unit. If there is waste debris that makes the door leaf sound louder, please clean the waste debris in the unit.

2. Check whether the rail has large clearance. If the gap is too large, it may make the running sound of the door leaf louder.

3. Check whether the sling structure of the sensing unit is loose. If some parts are loose, the door leaf will run larger, just strengthen it.

These are the possible common false faults of the electric induction door. We will analyze the fault of the sensor door after installation, because it is likely to be a false fault in some details.