What is the reason why the induction automatic door cannot be opened or closed?

In the use of inductive automatic door, we often encounter the problem that the automatic door cannot be opened or closed. Why on earth? How should we solve it? Next, I will tell you about the situation when the sensing door is opened and cannot be closed:


1. The automatic door anti-pinch function is causing trouble. The automatic machine has the anti-pinch function. If the automatic door cannot be closed normally for three times due to obstacles or collisions, the automatic door will stop working, and the door leaf will stop opening or closing. It can be recovered by pushing the door leaf to the fully open state. Although it is inconvenient, personal safety is very important. The anti-pinch function can also maintain the glass of the automatic door leaf broken.


2. When people walk past, they turn off automatically. When people leave, they turn on and turn off automatically. This situation is also easily understood as not being able to close or open. This is not the cause of automatic door failure. This is because the power belt is installed reversely during the maintenance or installation of the automatic door. For this matter, I just need to change the buckle connection of the belt.

3. The induction automatic door does not move when the power is turned on whether it is closed or closed. This situation is relatively complex. It may be that there is no power supply although it is plugged in. It is also possible that the door leaf is jammed, or that the controller crashes. For this phenomenon, first check whether the indicator light of the power supply is on, and pull the door leaf manually to see if it is jammed.

4. Inductive automatic door remote lock causes that your automatic door cannot be opened and closed automatically because of misoperation or forgetting to use the remote control to lock the automatic door before it is busy. At this time, use the remote control to unlock it.