How to open Humen fast rolling shutter door
In Humen, many enterprises and commercial places have chosen the fast rolling door of Haifeng Automatic door to achieve efficient and convenient traffic and space separation. But do you really know how to properly open these fast rolling doors? This article will give you more details.
The fast rolling shutter door opening mode of Haifeng automatic door is usually divided into the following types:
First, manually open
When there is a power outage or control system failure, the manual opening function is particularly important. Under the body of the fast shutter door, you will find a manual zipper or crank. Pull the zipper or turn the handle to slowly raise or lower the door body. It should be noted that manual operation is relatively laborious, so the normal operation of the power and control system should be maintained in peacetime.
Two, remote control open
This is the most common and convenient way to open. Each Haifeng fast shutter door will be equipped with a special remote control. Press the "Open" button on the remote control and the door body will quickly roll up. When using the remote control, make sure that there is no obstacle between you and the door body to block the signal, and that the battery of the remote control is sufficient.
Three, induction open
The fast rolling shutter doors of Haifeng automatic doors are also equipped with advanced induction devices, including infrared induction and geomagnetic induction.
Infrared sensing: When someone or an object is close to the door at a certain distance, the infrared sensor will detect the signal and automatically trigger the door to open. This method is suitable for places where people frequently enter and exit, such as factory workshops, logistics warehouses, etc.
Geomagnetic induction: A geomagnetic induction coil is installed under the ground in front of the door body, and when the vehicle or other objects with metal substances pass by, the magnetic field will change, thus opening the rolling shutter door. Geomagnetic induction is often used in parking lots, loading and unloading areas where vehicles pass.
Four, button open
On the wall near the door body, open and close buttons are usually installed. Press the open button, and the quick shutter door will perform the opening action. The button opening mode is suitable for operation in a fixed position, such as a guard room or an operation room.
No matter which opening method you choose, when using the fast rolling door of Haifeng automatic door, you need to pay attention to the following points:
1. During the operation of the door body, do not stand under or near the door body to avoid accidents.
2. Regularly check the operating condition of the door body, including whether the guide rail is clean, whether the door curtain is damaged, whether the motor and control system are normal.
3. Keep the environment around the door clean to avoid debris accumulation affecting the normal operation of the door.
Haifeng automatic door has been committed to providing customers with high quality products and excellent service. If you encounter any problems in the process of using the fast shutter door, you can contact our professional technicians at any time, they will provide you with timely and effective solutions.
Correctly opening the fast rolling door of Humen Haifeng automatic door can not only improve your work efficiency, but also ensure that your production and business activities are carried out in a safe and orderly manner. I hope that through the introduction of this article, you can have a deeper understanding of the way to open the fast shutter door, so that Haifeng automatic door will bring more convenience to your life and work.
