Baoan Yutang automatic door installation customization / automatic door maintenance in Shiyan Industrial Zone
Time: 2020-03-03 View: 1347
Baoan Yutang automatic door installation customization / automatic door maintenance in Shiyan Industrial Zone
After cleaning with cleaning agent, remember to clean with water to avoid too much smell. The nameplate shall be fixed in an obvious position. The nameplate material is aluminum or stainless steel and other metal materials. The nameplate shall have complete and accurate manufacturing name, address, trademark, product name, specification and model, fire resistance performance, executive standard, manufacturing date and other information. Secondly, the thickness of the door leaf. The actual thickness of the fire door leaf inspected by sampling shall be measured on site to ensure that the actual thickness meets the requirements of the nominal thickness of the sample in the inspection report. If there is a special-shaped structural door leaf, the large depth of the special-shaped door leaf shall be measured whether it conforms to the statement in the nominal depth inspection report, and it shall not be greater than the depth of the nominal special-shaped inspection model.But glass doors are very different at this point. Compared with wooden doors, it is very fragile. Next, I´ll summarize the installation method for you. Roller shutter is very common in daily life, which shows that roller shutter is very popular. This is because they have the functions of rainproof, moistureproof, soundproof, antiskid, cold proof, heat preservation, sunscreen, windproof and sand proof. They are used in many buildings, but any multipurpose building.Then, the overall appearance, length and width of the fire doors and the proportion of the two doors of the double doors shall be emphatically checked to see whether they are consistent with the contents of the type approval certificate, so as to prevent the overall appearance size from exceeding the scope of the type of approval certificate. The door leaf size of double door or auxiliary mother door shall ensure that the larger door leaf size is not greater than that of the certified product. After that, it should check the connection between the fire door leaves and the form of cutting the middle seam of the door leaf or the form of butt flat seam, whether there is a seam cover plate, whether the width of the seam cover plate is sufficient, whether the tension between the door leaf and the door leaf is compressed, and whether the inspection report is consistent with the standard of the sample.Nowadays, the development trend of electric rolling door industry is that the environmental protection laws and regulations of doors and windows are more and more perfect, and the green and healthy products of doors and windows are the trend. In this environment, many electric shutter manufacturers are facing a huge crisis.The overlapped door leaf and door frame, the overlapped fire door leaf and door frame shall be checked to see if they conform to the sample inspection report of design size, if there is overlapped sealing, and if the sealing performance is good. Do you know how to check the newly produced fire doors? We should check the signs, shapes, connection methods, etc. Only in this way can we guarantee our customers´ satisfaction with our products. If you want to know about our products, you can choose to communicate with us.
