How to deal with the malfunction of the rapid door in the Xixiang dust-free workshopIn the dust-free workshop of Xixiang, the rapid door plays a crucial role. It can not only open and close quickly, improving logistics efficiency, but also effectively isolate dust, bacteria and other pollutants, ensuring a clean environment in the workshop. However, during the long-term use of rapid doors, some malfunctions are inevitable. The following is a detailed introduction to common malfunctions and their handling methods for everyone.
The rapid door cannot be opened or closed normally
This is one of the most common malfunctions of rapid doors. First of all, check if the power supply is normal. Inspect whether the switch inside the distribution box has tripped and if the plug is loose. If there is no problem with the power supply, then check whether the circuits in the control box are damaged or loose, especially the circuits connecting the motor and the controller. If any problems with the wiring are found, they should be repaired or replaced in a timely manner. In addition, a malfunction of the limit switch may also cause the door to fail to open or close normally. It is necessary to check whether the limit switch is damaged and whether its position is correct. If there are any problems, adjustments or replacements should be made.
The rapid door is lagging or making abnormal noises during operation
When the rapid door experiences jamming or abnormal noise during operation, first check if there is any debris blocking the guide rail. If so, it should be cleaned up promptly. At the same time, it is necessary to check whether the guide rail is deformed. If it is deformed, it needs to be corrected or replaced. In addition, excessive friction between the door curtain and the guide rail can also cause jamming and abnormal noise. You can apply an appropriate amount of lubricating oil inside the guide rail to reduce the friction. Motor failure may also cause such problems. It is necessary to check the operation of the motor, see if it is overheated and if there is any abnormal noise. If the motor is faulty, it needs to be repaired or replaced in time.
The safety sensor of the rapid door is malfunctioning
The safety sensor device is an important component of the rapid door. It can automatically stop and rebound when it detects an obstacle during the door closing process, ensuring the safety of people and items. If the safety sensor malfunctions, first check whether there is dust or dirt on the surface of the sensor. If so, it needs to be cleaned. Then, check whether the installation position of the sensing device is correct and whether it is blocked. If there is a problem, adjustments need to be made. In addition, the sensitivity of the sensing device may need to be adjusted. It can be regulated according to the operation method in the manual.
In the dust-free workshop of Xixiang, when the rapid door malfunctions, it is necessary to carry out timely investigation and handling. If you are unable to solve the fault by yourself, you should contact professional maintenance personnel in time to ensure that the rapid door can resume normal operation as soon as possible and maintain the production order and clean environment of the workshop.
