Customized quick door of Huizhou dust-free workshop / quick door of cold storage manufacturer / quick industrial door consultation
Time: 2020-04-05 View: 1497
Customized quick door of Huizhou dust-free workshop / quick door of cold storage manufacturer / quick industrial door consultation
Based on the traditional door, Haifeng fast door has the characteristics of fast speed, strong durability, high reliability, time saving and environmental protection. Fast opening and closing speed improves the flow efficiency of materials and saves energy cost. In addition, the fast door has the characteristics of large volume, fast flow speed, light weight and strong security. Compared with the low-speed industrial door, the fast door has a higher value.
During the opening and closing process, no one is allowed to stand or walk under the fast door. In order to prevent the failure of travel switch, fast door stuck, motor blocking and other accidents.When people and vehicles enter and exit the high-speed rolling shutter door, first press the up button on the high-speed rolling shutter door control box to open the high-speed rolling shutter door. When people and vehicles pass, press the down button on the control box on the other side of the door to close the quick shutter door. This method is inefficient and incompatible with the traditional fast shutter switching mode. Automatic mode: when people and vehicles enter and exit the fast winding door, pull the pull rope switch first to open the fast winding door; after a period of time, the system will automatically close the fast winding door. This method is very common now. Automatic mode: when personnel and vehicles arrive at the fast roll door, the operating system detects the presence of personnel and vehicles through infrared sensor or ultrasonic sensor, and the system automatically opens the fast roll door. When people and vehicles pass, the system detects the information and automatically closes the quick roll door. Terminal dealers directly represent the enterprise, and better service can not only be affirmed by the door and window enterprises, but also better develop the market, and improve the service level is inevitable. The above is the experience of old drivers in the fast door industry on how to buy aluminum alloy doors and windows. In fact, you can also contact more kinds of information privately to deepen your understanding of all kinds of information, so that it is difficult to be cheated by the manufacturer whether you buy the shutter or other types of products.Upper and lower limit debugging detection: when the door body is still, press the up button, and the door body will run upward. After buffer and complete stop, judge whether the lifting height meets the user´s requirements. If it does not meet the requirements, it shall be re debugged; then press the button to observe whether the stop position at the end of the door body is normal after the door body stops falling completely. Emergency stop button: during the operation of the door body, press the emergency stop button and observe whether the door body stops immediately. If it still operates normally, please check whether the emergency stop button is faulty or damaged. Debugging of automatic opening function: simulate the actual situation with the action of vehicle and personnel, and observe whether the door body can be opened in time and whether it covers the full angle signal.
