How much to replace the glass sensor door controller
Time: 2020-07-16 View: 1839
How much to replace the glass sensor door controller
How much to replace the glass sensor door controllerShenzhen Haifeng Automatic Door Co., Ltd. has 15 years of installation and after-sales experience, specializing in replacement and maintenance of domestic and imported automatic induction door motor, replacement of induction door fingerprint lock and other accessories.
Haifeng maintenance glass automatic door, sensor. Haifeng automatic door supply and installation of Panasonic automatic door, Korean imported automatic door, domestic automatic door, access control, sensor, security anti pinch, automatic door maintenance, track replacement, etc.Automatic door standard configuration: 1 motor, 1 controller, 2 sensors, 1 pulley (4), 1 belt, 1 pulley, 2 buckles, 2 stops, 1 guide rail, 1 instruction manual.There are many types of automatic sensing doors. Taking the translational automatic induction gantry crane as an example, the composition of the automatic induction gantry crane is introduced(1) Main controller: control center of automatic door. Through the large integrated block with instruction program, the corresponding command is issued to command the motor or electric lock system to work; at the same time, people adjust the opening speed and opening amplitude of the door leaf through the main controller.(2) Induction detector: mainly divided into two types: microwave sensor and infrared sensor. It collects external signals, such as people´s eyes. When a moving object enters its working range, it gives the main controller a pulse signal.(3) Power motor: provide the main force of door opening and closing, control the acceleration and deceleration of door panel.(4) Travel path of gate leaf: like the train track, the crane wheel system of gate leaf is limited, which makes it travel in a specific direction.(5) Gate leaf elevator system: it is used to hang the movable gate leaf and drive the gate leaf to run under the power traction.(6) Synchronous belt (V-belt is adopted by some manufacturers): it is used to transfer the power generated by the motor and traction the gear train of the door leaf paver.(7) Lower guiding system: the guiding and positioning device at the lower part of the door panel is used to prevent the front and rear door body from swinging when working.
