How to purchase an appropriate automatic sensing door?

Whether we are in hotels, office buildings, shopping malls or other public areas. I often see automatic induction doors. Did you know that there are different types of automatic induction doors and their applications are very particular. So when you buy, you should do some understanding. Today, the Shenzhen automatic door manufacturer will tell you about the types and applications of automatic induction doors.

There are many kinds of automatic induction gates. First, the translational induction gate group is composed of the following components: the main controller: it is the command center of the automatic gate, which sends corresponding commands to command the motor or electric lock system through the large-scale integrated block with internal command program; At the same time, people adjust the opening speed, opening range and other parameters of the door leaf through the master controller.

Inductive detector: It is responsible for collecting external signals. Like people´s eyes, when a moving object enters its working range, it will give the main controller a pulse signal; 3. Power motor: provides the main force for opening and closing doors, and controls the acceleration and deceleration of door leaves. Door leaf travel track: just like the railway track of a train, it constrains the lifting wheel system of the door leaf to make it travel in a specific direction.

Door leaf hanger traveling wheel system: used to hang movable door leaf and drive the door leaf to run under power traction. Synchronous belt (some manufacturers use V-belt): it is used to transmit the power produced by the motor and pull the traveling wheel system of the door leaf hanger. Lower guide system: it is a guide and positioning device for the lower part of the door leaf, which prevents the front and rear door body from swinging during the operation of the door leaf.

When the induction detector detects that someone is entering, it sends the pulse signal to the main controller. After the main controller judges, it informs the motor to run. At the same time, it monitors the number of motor revolutions, so as to inform the motor to apply force and enter into slow running at a certain time. When the motor gets a certain running current, it will run in the positive direction to transmit power to the timing belt, and then the timing belt will transmit power to the spreader system to open the door leaf; After the door leaf is opened, the controller makes a judgment. If it is necessary to close the door, the motor is notified to make a reverse movement and close the door leaf.

From the above contents, we know the types and applications of automatic induction doors. In the future purchase process, we will not take a detour to buy induction doors that are not suitable for us, so as to avoid economic losses caused by changing. Thank you very much for telling us about the types and applications of automatic induction doors.