The daily maintenance and inspection of automatic sliding doors is very important

With the continuous development of society, people´s living standards are also improving day by day. Proactive devices have attracted more attention from everyone, and now we share some industry information related to active doors.

To ensure the safe and reliable operation of the active sliding door, users or the management personnel of the active sliding door need to conduct necessary operation checks on the active sliding door during normal times.

1. Personnel should move towards the active sliding door at normal speed from outside or inside the door. The active sliding door should be opened actively, and the action of the active sliding door should be smooth and not show any collision; After the active sliding door opens, when personnel slowly pass through it at a speed of about 150mm-200mm per second, the active sliding door should remain open;

2. When a person leaves the sensing area of the active sliding door sensor, after a delay of 1-10 seconds (the duration can be set by the parameters of the active sliding door switch), the active sliding door will be actively closed, and the action of the active sliding door should be smooth and there should be no collision;

3. Investigators need to adjust their normal walking route to face the person towards the active sliding door, rather than walking towards the active sliding door from a certain perspective;

4. When walking towards the active sliding door, the sensing width scale of the active sliding door sensor should be greater than the width of the fully opened door;

5. If an auxiliary light sensor (infrared radiation protection device) is installed on the active sliding door, and when the door is opened, people stand still and block the auxiliary light sensor with their hands, the door should remain open. Within seconds after the hand disengages, the door should be closed from the beginning.

When there is a problem with the active sliding door, please immediately cut off the power supply of the active sliding door for maintenance, and then contact the automatic door maintenance company for handling.