The fast door infrared is not sensitive. What happened?
"Fast door infrared sensitive? Haifeng automatic door analysis for you"
In the modern industrial and commercial environment, fast doors are widely used because of their efficient and convenient characteristics. As a well-known brand in the industry, Haifeng automatic door has always won the trust of customers with its high-quality products and reliable service. However, even the excellent quality of the Haifeng fast door may encounter the problem of infrared insensitivity during use. So what´s going on here?
First, we need to understand how fast door infrared works. Infrared sensors detect the presence of objects by transmitting and receiving infrared signals. When someone or an object enters its detection range, the infrared ray is blocked, and the sensor will immediately send a signal to the control system, so that the fast door can make corresponding actions, such as stopping the closing, reversing the opening, etc., to ensure the safety of personnel and items.
If the infrared light of Haifeng fast door becomes insensitive, it may be caused by the following reasons:
1. Accumulation of dust and dirt: Long-term use will lead to the accumulation of a large amount of dust and dirt around the fast door, and these pollutants may be attached to the surface of the infrared sensor, affecting the infrared emission and reception effect.
2. Sensor position offset: the vibration or external force collision of the fast door during operation may offset the position of the infrared sensor, resulting in inaccurate detection range.
3. Line failure: The line connecting the infrared sensor and the control system may fail due to aging, wear or damage, affecting the transmission of signals.
4. Sensor damage: The infrared sensor itself may be damaged due to long-term use, overload or other reasons, and cannot work normally.
5. Environmental interference: harsh environmental conditions such as strong sunlight, high temperature, and humidity may interfere with the performance of the infrared sensor, causing it to be insensitive.
In response to the above problems, we can take the following measures to solve the problem of infrared insensitivity of Haifeng fast door:
1. Regular cleaning: Regularly wipe the surface of the infrared sensor with a clean soft cloth to remove dust and dirt and keep it clean.
2. Check and adjust the position: check the position of the sensor regularly. If there is deviation, adjust it in time to ensure that the detection range is accurate.
3. Line inspection and maintenance: Regularly check whether the line is damaged, aging, etc., and timely replace or repair the faulty line.
4. Sensor replacement: If the sensor is damaged, the new sensor should be replaced in time to ensure the safety performance of the fast door.
5. Improve environmental conditions: try to create a good operating environment for the fast door to avoid strong direct sunlight, high temperature and humidity and other adverse factors.
In short, when the infrared of the Haifeng fast door is not sensitive, do not panic. By carefully checking the above possible causes and taking appropriate measures, you can quickly restore the normal operation of the quick door and ensure the safety of personnel and items. Haifeng automatic door has been committed to providing customers with quality products and perfect after-sales service, if you encounter any problems in the process of use, welcome to contact us at any time, we will be happy to serve you!
