How to replace the fast door track
In industrial and commercial Settings, the efficient operation of fast doors is essential to ensure a smooth and safe workflow. As a key component of the fast door track, it may be worn, deformed or damaged after long-term use, which will affect the normal operation of the door. At this time, timely replacement of the fast door track becomes a necessary maintenance work. Next, let´s take the Haifeng automatic door as an example to understand the replacement steps of the fast door track in detail.
1. Preparation
1. Prepare tools
Ensure that tools, such as wrenches, screwdrivers, levels, measuring tape, and electric drills, are available and in good condition.
2. Material preparation
According to the model and specification of the fast door, prepare the new track, fixing screws, connecting pieces and other materials in advance.
3. Security measures
Before the replacement, ensure that the power supply is turned off and warning signs are set up to prevent accidents.
Second, remove the old track
1. Remove the screws and components connecting the quick door to the track one by one using a screwdriver and wrench.
2. Carefully lift the fast door from the old track and place it in a safe position to avoid damage to the door body.
3. Next, remove the fixing screws and connecting pieces of the old track, and remove the old track from the installation position.
Third, install new tracks
1. Use a tape measure and level to accurately measure and mark the installation position of the new track at the installation position, ensuring that the track is installed horizontally and vertically.
2. Place the new track in the marked position, and use the fixing screws and connecting pieces to fix it initially.
3. In the process of fixing the track, constantly use the level to check the levelness and verticality of the track, and adjust it in time if there is any deviation.
Four, connect the fast gate to the new track
1. Lift the fast door so that it is aligned with the new track.
2. Securely connect the fast door to the new track using screws and connectors.
3. Check whether the operation of the door body on the track is smooth, if there is a blockage or excessive resistance, adjust the position of the track and connecting parts in time.
5. Debugging and testing
1. After the installation, switch on the power supply and test the fast door multiple times to observe the running speed, stability and sealing performance of the door body.
2. Check whether the gap between the track and the door body is uniform, and whether the track is fixed firmly.
3. If necessary, debug the control system of the fast door to ensure that its parameter Settings meet the requirements.
6. Clean up and finish
1. Clean up the garbage and debris generated in the process of replacing the track, and keep the work site clean.
2. Clean and maintain the fast door track and door body to extend its service life.
Replacing the fast door track is a job that requires professional skills and patience, if you are not confident in your ability to operate, it is recommended that you contact the professional technicians of Haifeng automatic door to replace it. Haifeng automatic door has been committed to providing customers with high-quality products and perfect after-sales service, so that your fast door has always maintained a good running state, providing convenient and safe protection for your work and life.
