The first generation of aluminum door perspective
Haifeng garage door installation process has no fixed mode. The installation process can be determined according to the actual situation of the installation process. Before installation, you should measure the size of the opening to determine the width and height of the door panel. Each side of the door plate and the door seat shall be overlapped by 20 mm, each side of the door seat shall be overlapped by 20 mm, and the head of the door seat shall be overlapped by 20 mm. From the edge stack of the door, you can add the amount of overlap on one side of the door panel and the door stack by more than 45 mm, draw a vertical line on both sides of the door stack so that the vertical outside of the rail is aligned with the vertical line, and the position of the mounting hole is traced to the fixing bracket and bearing bracket. In order to simplify the operation procedure, firstly, combined with the fixed frame and seven angle steel and tracking, drawing lines and drilling holes, according to the actual position, insert expansion bolts to install the vertical railway, and install the vertical railway and seven angle steel and expansion bolts to fix the door stack.
(1) Can also be made into a full perspective door panel.
(2) Aluminum frame can be selected according to the building of a variety of standard colors.
(3) Door frame: our patented aluminum profile. The profile specification can be selected according to the size and wind resistance of door panel. And has a variety of anti pinch function profile.
(4) Transparent panel: PC board made of German polycarbonate, with thickness of 4mm-5mm, can be selected according to door width and window width. It has excellent anti ultraviolet function, and its impact resistance is 100 times that of toughened glass.
