Saiying No. 3
Haifeng saiying No. 3 automatic expansion door is made of high-strength aluminum alloy by one-time casting! 58x51mm special-shaped main material is bright red, and it is made of electrophoresis silver white 38x25mm three rows of net flowers. Its structure is strong and undoubted! The wheel center distance is 720mm, and the total width is 790mm. Red and silver saiying No. 3 is more intriguing!
The acoustic limit and anti climbing detection device of the electric retractable door measures the opening and closing length of the automatic retractable door and the infrared limit position length of the automatic retractable door using the acoustic ranging principle, and the output control is sent to the main controller MCU. When the main single chip microcomputer detects that the door has been opened and closed in place, it controls the automatic expansion door motor to stop running. When it is detected that the infrared limit is removed, resulting in the failure of the infrared anti-collision function,
The electric expansion door can be opened and closed within the set range. After closing the limit position, the conventional transmission of the electric expansion door is used as the radiation source of anti climbing induction. When it is detected that it is blocked by an obstacle, it is considered that someone or an obstacle climbs on the expansion door and makes a sound, so as to realize anti climbing.
The service life of the electric expansion door is closely related to the daily correct use, reasonable maintenance and timely maintenance. 1. The power supply of the electric expansion door must be set with a special circuit, and it is strictly prohibited to use it with other electrical appliances. 2. The product can be used only after it is installed firmly and debugged to be qualified. 3. The control box must be installed in a dry and ventilated place. It is strictly prohibited to approach high-power radio equipment to avoid affecting normal operation. When using the control button, do not use too much force or too much force to avoid damage. 4. During the operation of the door body, it is strictly prohibited for personnel and vehicles to stay on the guide rail. The operator shall pay attention to the operation of the door body at any time to avoid accidents. 5. The track shall be cleaned frequently to avoid the accumulation of sundries affecting the operation. 6. When pushing and pulling the electric expansion door, it shall be opened and closed slowly. Do not push or pull to avoid damage. 7. The transmission device shall be injected with lubricating oil at least once a year, the chain shall be injected with lubricating oil frequently, and the wear condition of all parts shall be checked, and the parts with serious wear shall be repaired or replaced in time. 8. When the product fails. Please inform the professional maintenance personnel in time for maintenance; the non professional personnel shall not open without permission, otherwise it will be deemed as the initiative to give up the warranty right.
